| A synthetic industrial gear oil based on synthesized hydrocarbons (PAO) under addition of special additives the following properties are obtained: - a natural high viscosity index - excellent high and low temperature properties - a very good resistance towards high pressures and shock loads - a high resistance to 'micro-pitting' - a high resistance against corrosion and oxidation - a long service life - a strong reduction of wear |
This synthetic oil is very suitable for the lubrication of heavy loaded mechanical
gearboxes and bearings with a high thermal load. In comparison with mineral industrial
gear oils a substantial extension of the oil drain interval is possible. This oil is
compatible with all seal materials and paints normally specified for use with mineral oils.
So no special change-over procedure is necessary.
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|
| 12X1L | 4X4L | 4X5L | 20L | 60L | 208L | 1000L |
| SAE | Unit | Average Value |
|---|---|---|
| Плотность при 15 °C | kg/l | 0.857 |
| Вязкость при 40 °C | mm²/s | 320,00 |
| Вязкость при 100 °C | mm²/s | 39.90 |
| Коэффициент вязкости | 178 | |
| Температура вспышки по Кливленду | °C | 260 |
| Температура застывания | °C | -42 |
| Кислотность | mgKOH/g | 1.10 |
